PT02 · STOICHIOMETRY
2A:1B vs. 1A:1B Mix Ratio & 350 RPM Discipline
Exact Part A resin & Part B hardener stoichiometry, 3-minute submerged helical mix, and immediate ribbon dump rule.
INITIAL CURE4–6 HOURS
FINAL CURE48–72 HOURS
HARDNESSSHORE D 82–85
COVERAGE125–150 SQ FT / 3-GAL KIT
DIRECT FACTORY DISPATCH · SKU EP-49-CLR · 2:1 BY VOLUME
EPOXY 49 — High Performance Coating (3-Gal Kit)
$179 – $795Batch-matched TDS included · Freight quoted at checkout
KIT SIZE & YIELD3-Gal Split Bucket Kit (2A:1B)Covers ~150 sq ft / kit
CONTAINER FORMAT1-Gal Split Buckets (8.75"×5") & 5-Gal PailsUN-rated jobsite packaging
KIT CONTENTS2 Gal Part A (Resin) + 1 Gal Part B (Hardener)Pre-proportioned factory fill
MIX RATIO (A : B)2:1 BY VOLUME (2 PARTS A : 1 PART B)350 RPM spiral paddle · 2–3 min
Restocking Soon — Request Priority Allocation / LTL Quote →
Strict on-hand policy: 0-stock & 5-Gal LTL items reserve directly on our Houston 77008 Priority Allocation Pad (unlocks PRO15 / CREW20 / PALLET25).
ASTM Technical Data Sheet (PDF) ↓Kit SDS (PDF) ↓Part A SDS ↓Part B SDS ↓Part A Label PDF ↓Part B Label PDF ↓Calculate kits for your sq ft →
100% Solids Epoxy Coating engineered for industrial, commercial, and residential concrete floors. High-durability high-build resin system.
VISUAL ENGINEERING BREAKDOWN · 2000×2000 HIGH-CONTRAST PLATES
Stoichiometry, Film Build, ASTM Lab Proof & 5-Stage Slab Architecture
PT03 · FILM BUILD
32–40 Mil 100% Solids vs. 2–3 Mil Water-Based Paint
Zero evaporation shrinkage vs. 50% carrier loss in box-store garage kits that peel under hot tires.
PT04 · ASTM LAB PROOF
11,500+ PSI Compressive & 25 lbs MVER Defense
Verified ASTM D695 compressive load, Shore D 82–85 hardness, Taber <25 mg wear, and 2,000+ hr QUV non-yellowing.
PT05 · 5-STAGE ARCHITECTURE
Cross-Section Slab Cutaway (CSP 2–3 to Polyaspartic)
Monolithic bond from diamond-ground concrete through Primer/MVB 49, Epoxy 49 + Mica/Flake, and Polyaspartic 49.
300 DPI PRESS ARTWORK & CONTAINER VERIFICATION
Packaging Label & Container Preview
1080P FIELD APPLICATION & CURED FINISH
Live Pour & Showroom Performance
EPOXY 49 · LIVE APPLICATION
EPOXY 49 Jobsite Mixing & Pour Execution
100% SOLIDS HIGH-BUILD CLEAR EPOXY / METALLIC BASE COAT
CURED COMMERCIAL FINISH
3-Car Showroom Mirror-Gloss Floor
Shore D 82–85 cured armor rated >11,500 psi compressive strength and hot-tire immune to 140°F.
| Solids Content | 100% (ASTM D2697) |
|---|---|
| Mix Ratio (A:B) | 2:1 by Volume |
| Mixed Viscosity | 700 – 900 cps |
| Shore D Hardness | 82 – 85 D (D2240) |
| Tensile Strength | 7,800 psi (D638) |
| Compressive Strength | 11,500 psi (D695) |
| Flexural Strength | 9,800 psi (D790) |
| Concrete Adhesion | >400 psi (Slab Fail) |
| Water Absorption | <0.10% (D570) |
| VOC Content | <10 g/L (EPA 24) |
| Pot Life (72°F Mass) | 20 – 30 Minutes |
| Working Time on Slab | 30 – 45 Minutes |
| Light Foot Traffic | 24 Hours @ 72°F |
| Full Vehicle / Tire | 72 Hours @ 72°F |
- 01Mechanical Prep: Grind concrete to ICRI CSP 2-3 profile. Vacuum slab dust-free.
- 02Moisture Check: Slab must test <3 lbs MVER or <75% RH. If higher, apply MVB 49.
- 03Pigment Incorporation: Pre-mix 1 jar (150g) Epoxy49 Metallic Pigment per gal Part A.
- 04Mix Ratio: Accurately combine 2 Parts A to 1 Part B by volume in clean mixing pail.
- 05Mechanical Mix: Blend 3 minutes with spiral paddle at 350 RPM. Scrape bucket sides.
- 06Immediate Placement: Empty contents immediately onto floor in continuous ribbons.
- 07Spread & Back-Roll: Spread with 18" Magic Trowel or notched squeegee; back-roll with 3/8" nap.
- 08Coverage Yield: Metallic flow: 125–150 sq. ft. per 3-gal kit (32–40 wet mils). Neat: 300–450 sq. ft.
- 09Artistic Movement: Mist 91% Isopropyl alcohol within 20 min to create custom marbling effects.
- 10Recoat Window: 8 to 24 hours. If >24 hrs, mechanically abrade with 80-grit screen.
CORROSIVE
IRRITANT
AQUATIC
- H314: Causes severe skin burns and serious eye damage.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory tract irritation.
- H411: Toxic to aquatic life with long lasting effects.
MANDATORY APPLICATOR PPE
Nitrile Gloves8+ mil chemical resistant
Splash GogglesANSI Z87.1 eye protection
OV RespiratorNIOSH organic vapor cartridge
Spiked FootwearLong sleeves & 3/4" spikes
24-HR CHEMTREC EMERGENCY:1-800-424-9300