Engineered for North Texas expansive Blackland clay slabs, 100°F+ DFW summer garage pours, and heavy aviation/logistics bays from Alliance & Love Field to Frisco, Plano, and Southlake. Epoxy49 LLC dispatches zero-filler EPOXY 49, 25-lb MVER MVB 49, deep-penetrating PRIMER 49, and UV-stable POLYASPARTIC 49 next-day to DFW contractors and homeowners from our 1714 W 23rd St, Houston, TX 77008 plant.
1-Gal Split Buckets · 1-Gal Silver F-Tins · 5-Gal Pails
240-Mile Direct I-45 Corridor Transit · Codes PRO15 / CREW20 / PALLET25NORTH TEXAS GEOTECHNICAL & THERMAL SOP
Unconditioned residential garages in Frisco, McKinney, Plano, and Fort Worth routinely experience two failure modes that destroy big-box 45%-solids waterborne kits within a single season: expansive clay slab movement and extreme summer thermal shock.
METROLPLEX CORRIDORS & LTL TRANSIT
Orders ship direct from Epoxy49 LLC (1714 W 23rd St, Houston, TX 77008) straight north up I-45—delivering 1-day ground parcel and next-day palletized LTL freight with zero distributor markups:
STUDIO CONTAINER PACKSHOTS · DFW CONTRACTOR STOCK
100% SOLIDS HIGH-BUILD CLEAR EPOXY / METALLIC BASE COAT
$179.00 / 3-Gal Split Bucket Kit (2A:1B)
DEEP-PENETRATING ADHESION PRIMER | 100% SOLIDS
$149.00 / 3-Gal Split Bucket Kit (2A:1B)
MOISTURE VAPOR BARRIER EPOXY | SUPPRESSES UP TO 25 LBS MVER
$199.00 / 3-Gal Split Bucket Kit (2A:1B)
CLEAR TOPCOAT (99% SOLIDS) | RAPID RETURN TO SERVICE
$219.00 / 2-Gal Metal F-Tin Kit (1A:1B)
Coating a 750 sq ft 3-car garage in Frisco or a 25,000 sq ft logistics facility near DFW Airport? Order factory-proportioned 1-Gal split kits for residential crews or 5-Gal commercial pails on shrink-wrapped LTL skids with batch-matched COA & 16-section OSHA GHS Safety Data Sheets.
DFW CONTRACTOR WHOLESALE TIERS
Requirement: Any floor kit or order $350.00+ — Instant $50.00 store credit toward your first Garage Floor Kit or Business-in-a-Box bundle.
Requirement: Any resin order $500.00+ — 100% material credit rebate on your $97 Digital Blueprint Pass when ordering physical kits.
Requirement: Minimum 5 Kits / Items — Instant 15% contractor discount at checkout on orders of 5+ kits or items.
Requirement: Minimum 20 Kits / Items — Instant 20% volume discount at checkout on orders of 20+ kits or items.
Requirement: Minimum 50 Kits / Items — Maximum 25% pallet-rate discount at checkout on orders of 50+ kits or items + priority LTL freight.
DFW TECHNICAL DESK · VIRTUAL SLAB CHECK & NEXT-DAY LTL
Pouring a 3-car metallic garage in Plano or bidding an aviation hangar at Addison Airport? Book a 20-Minute Virtual Slab Crack & Moisture Review or get a same-hour LTL pallet freight quote from our Houston dispatch terminal.
NORTH TEXAS TECHNICAL FAQ
Dallas–Fort Worth sits on high-plasticity Houston Black clay (Plasticity Index 35–55) that swells during spring storms and shrinks during 100°F+ summer droughts. Before priming, chase all hairline and shrinkage cracks with a dry diamond V-crack blade to 1/4" width, HEPA-vacuum clean, flood with low-viscosity PRIMER 49 (350–450 cps), and trowel flush using 100% solids epoxy/polyurea fumed-silica paste. Never bridge active structural control joints—honor expansion cuts with flexible polyurea joint sealant after POLYASPARTIC 49 cures.
Epoxy curing is exothermic: every 18°F (10°C) increase in resin temperature cuts bucket pot life in half. Stage all Part A (Green-Banded Resin) and Part B (Orange-Banded Hardener) pails indoors at 65°F–75°F until the exact moment of mixing, blend at 350 RPM for 3 minutes, and ribbon-pour the entire batch onto the concrete slab immediately. Leaving mixed EPOXY 49 in the bucket during a 102°F Frisco or Fort Worth afternoon will flash-gel the pail in under 8 minutes.
Epoxy49 LLC dispatches daily from our headquarters at 1714 W 23rd St, Houston, TX 77008 straight up the I-45 corridor (~240 miles). Orders placed before 2:00 PM CST ship same-day via 1-business-day ground parcel (1-Gal Split Buckets & 1-Gal Metal Tins) or next-day Texas LTL pallet freight for 5-Gal commercial skids across Dallas, Tarrant, Collin, Denton, and Rockwall counties.
Use PRIMER 49 ($149 / 3-Gal Kit) on sound, dry slabs testing under 3.0 lbs MVER (ASTM F1869) and below 75% internal RH (ASTM F2170). Specify MVB 49 ($199 / 3-Gal Kit) whenever new-build tracts in Prosper, Celina, Melissa, or Forney are poured over irrigated clay grades, lack an intact 15-mil vapor retarder, or read above 4.5% CME / 75% RH—locking down up to 25 lbs MVER and 99% RH.
DFW residential crews and commercial flooring contractors unlock instant tiered pricing at checkout with zero franchise fees: PRO15 (15% OFF 5+ kits), CREW20 (20% OFF 20+ kits), and PALLET25 (25% OFF 50+ kits / LTL pallet skids), plus $97 full rebate credit via BLUEPRINT97.
STATEWIDE CONTRACTOR SUPPLY NETWORK
1714 W 23rd St manufacturing & distribution desk. Gulf Coast 25-lb MVER moisture vapor remediation.
Open Regional Spec Hub →NEXT-DAY I-45 LTL & GROUNDBlackland clay crack-chasing specs, 100°F+ DFW summer pot-life SOPs, and 3-car residential & hangar kits.
Current Regional HubNEXT-DAY US-290 / I-35 TRANSITHill Country limestone hydrostatic MVB 49 defense, Lakeway/Westlake metallic garages & EV tech-bay coatings.
Open Regional Spec Hub →OVERNIGHT I-10 CORRIDOR DISPATCHSouth Texas dew-point & humidity protocols, Dominion/Boerne custom flake & I-10 fleet distribution slabs.
Open Regional Spec Hub →