01 / MASTER ASTM MECHANICAL & VOC SPECIFICATION SCHEDULE
| ASTM Test / Regulatory Standard | PRIMER 49 (PR-49-CLR) | MVB 49 (MVB-49-FAST) | EPOXY 49 (EP-49-CLR) | POLYASPARTIC 49 (PA-49-FAST) |
|---|---|---|---|---|
| Volume Solids (ASTM D2697) | 100% Solids | 100% Solids | 100% Solids | 98% – 99% High Solids |
| Compressive Strength (ASTM D695) | 10,800 psi | 12,000 psi | 11,500 psi | Topcoat Wear Layer |
| Tensile Strength (ASTM D638) | 7,200 psi | 8,200 psi | 7,800 psi | 6,500 psi |
| Durometer Hardness (ASTM D2240) | Shore D 80 – 82 | Shore D 84 – 86 | Shore D 82 – 85 | Shore D 80 – 82 |
| Taber Abrasion (CS-17, 1k cyc) | Sub-surface Prime | Sub-surface Vapor Lock | High-Build Structural Body | < 25 mg Loss (D4060) |
| Concrete Adhesion (ASTM D7234) | > 450 psi (Slab Failure) | > 450 psi (Slab Failure) | > 400 psi (Slab Failure) | Inter-Coat Chemical Bond |
| Moisture / Alkalinity Limit | < 3 lbs MVER / < 75% RH | 25 lbs MVER / 99% RH / pH 14 | Apply over Primer / MVB | Substrate > 5°F Dew Point |
| 50-State VOC (EPA 24 / SCAQMD 1113) | < 10 g/L | < 10 g/L | < 10 g/L | < 50 g/L |
02 / CHEMICAL, FLUID & FORKLIFT TRAFFIC EXPOSURE RATINGS
- Automotive Service Bays & Dealerships: Resists DOT-3 / DOT-4 brake fluid, transmission fluid, synthetic motor oil, ethylene glycol coolant, road de-icing brines, hydraulic 2-post lift baseplate point loads, and dropped impact sockets. Add #36 or #46 aluminum oxide / shark-grip media into the final POLYASPARTIC 49 coat for wet-bay OSHA slip traction.
- Aviation Hangars (MRO & Corporate Jet Bays): Engineered to resist Skydrol fire-resistant aviation hydraulic fluid, Jet-A turbine fuel, 100LL avgas, and heavy aircraft tug shear loads while boosting sub-wing lighting reflectivity by up to 300%.
- Distribution Warehouses & Cold/Dry Logistics: 45–64 dry mil monolithic assemblies eliminate concrete dusting on pallet racks, protect optical AGV/robotics floor sensors, and withstand continuous 10,000-lb cushion-tire and polyurethane-wheel forklift traffic without tire-blackening delamination.
03 / DIRECT SUBMITTAL PACKET: DOWNLOAD ASTM TDS & 16-SECTION OSHA GHS SDS
Architects, GC safety officers, and EHS compliance managers can download standalone PDF Technical Data Sheets and 16-Section OSHA HazCom 2012 Safety Data Sheets (CHEMTREC 24-Hr Emergency: 1-800-424-9300) directly below:
100% SOLIDS HIGH-BUILD CLEAR EPOXY / METALLIC BASE COAT
DEEP-PENETRATING ADHESION PRIMER | 100% SOLIDS
MOISTURE VAPOR BARRIER EPOXY | SUPPRESSES UP TO 25 LBS MVER
CLEAR TOPCOAT (99% SOLIDS) | RAPID RETURN TO SERVICE
TEXAS & NATIONWIDE LTL SKID DISPATCH FROM HOUSTON HQ
All formulations ship in palletized 5-Gallon commercial pails from 1714 W 23rd St, Houston, TX 77008 with same-day/next-day LTL service to Houston, Dallas–Fort Worth, Austin, San Antonio, and commercial docks nationwide.
04 / COMMERCIAL FACILITY ENGINEERING FAQS
Can Epoxy49 commercial flooring withstand 10,000-lb forklift traffic and 2-post automotive lifts?
Yes. Standard 3,500–4,000 psi commercial concrete spalls and dusts under hard polyurethane forklift wheels and steel jack stands. Cured EPOXY 49 delivers 11,500 psi compressive strength (ASTM D695) and MVB 49 delivers 12,000 psi compressive strength with Shore D 82–86 hardness—distributing point loads over >450 psi concrete pull-off anchor bonds.
Does POLYASPARTIC 49 resist Skydrol aviation hydraulic fluid, brake fluid, diesel, and battery acid?
Yes. Crosslinked aliphatic POLYASPARTIC 49 (98–99% solids, <25 mg Taber CS-17 abrasion loss) forms an impermeable chemical shield resistant to Skydrol aviation hydraulic fluid, DOT-3/DOT-4 brake fluid, Jet-A fuel, gasoline, diesel, motor oil, road salt, and dilute battery electrolyte.
Are Epoxy49 resinous systems 50-state VOC compliant and backed by 16-Section OSHA GHS SDS?
Yes. EPOXY 49, PRIMER 49, and MVB 49 test at <10 g/L VOC (EPA Method 24), and POLYASPARTIC 49 tests at <50 g/L VOC—meeting strict SCAQMD Rule 1113, CARB, OTC, and LEED v4.1 indoor air quality limits across all 50 US states. Every SKU includes a standalone 16-section OSHA HazCom 2012 (29 CFR 1910.1200) Safety Data Sheet with 24-hour CHEMTREC response (1-800-424-9300).
How do commercial facility managers order 5-gallon pail skids for 5,000–50,000+ sq ft warehouses?
All four formulations ship in both 1-Gal retail kits and 5-Gallon Commercial Pails on shrink-wrapped LTL pallet skids directly from 1714 W 23rd St, Houston, TX 77008. Contractors and facility engineers receive instant checkout discounts via CREW20 (20% OFF 20+ items) and PALLET25 (25% OFF 50+ items) or custom Net-30 skid quotes.